Calibrated 8mm Diameter, 1N/0.22lb Force (USB)

$225.95

This is a calibrated pair of a 8mm SingleTact sensor and USB electronics board. It comes with 50 cm USB cable and Calibration sheet.

The sensor and electronics are a matched pair, the calibration is stored on the electronics. You can use a tail extender with calibrated systems, but not interchange with other sensors.

Quantity:
Add To Cart

DOWNLOADS


SENSOR PERFORMANCE

Force Resolution

Maximum Force

Typical Repeatability Error

Operating Temperature

Temperature Sensitivity

Linear Error

Drift

Hysteresis

Response Time

Contract Surface Material

Sensor Thickness

Typical Baseline Capacitance

ESD Sensitivity

Material Grade

 

< 0.2% of Full Scale (FSR)

300% of FSR

< 1.0% (1 sigma of FS)

-40°C < T < 85°C

< 0.2%/° C

< 2.0%

2% in 1 min, 4% in 10 min, at 50% FSR load

< 4.0%

< 1ms(Measured using Oscilloscope)

Polyimide

0.30mm

8mm 75 pF; 15mm: 230 pF @ 100 kHz

Not sensitive to ESD

UL grade 94 V-1 or better


ELECTRONICS SPECIFICATIONS

Update Rate

Analog Out

Digital Interface

IO Voltage

Supply Voltage

Input Current

Weight

RoHS

Operating Temperature

 

>120 Hz

0.5-1.5V

I²C (100kHz), 10-bit resolution

3.3V

3.7-5V

2.7 mA

Sensor 0.23g/ Electronics 1.6g

Compliant

-40°C < T < 85°C


SOFTWARE


SENSOR MECHANICAL